How to maintain Tianjin packaging machines

How to maintain Tianjin packaging machines
Tianjin packaging machines need to be maintained during use, so do you know how to maintain Tianjin packaging machines. The Tianjin packaging machine adopts a reciprocating end sealing mechanism, which makes the sealing more firm and the sealing die cutting blade has no loss.
Tianjin packaging machine chain lubrication is relatively common. Each simple chain wheel should be promptly infused with mechanical oil with a kinematic viscosity greater than 40 #.
2. Tianjin packaging machine gear engagement operation. 40 # mechanical oil should be dripped onto each gear.
3. Each rolling bearing should be lubricated with a grease gun approximately every two months, as rolling bearings are a part of severely worn machines.

4. Some components of the Tianjin packaging machine cannot be replaced at will, and non professionals are not allowed to open electrical components, frequency converters, computers, and other control components. Setting parameters or steps and randomly changing them can damage the system and hinder the normal operation of the machine.
5. The operator of the Tianjin packaging machine should always check whether the threaded end of each joint is loose before starting the operation.
6. The clutch of Tianjin packaging machine is the key to starting a packaging machine, and the clutch components need to be lubricated at the correct time.